Skip to main content

Taking Purdue Gold to a whole new level

2021-09-02

Purdue researchers use gold film to enhance quantum sensing with qubits in a 2D material

Quantum sensing is being used to outpace modern sensing processes by applying quantum mechanics to design and engineering.  These optimized processes will help beat the current limits in processes like studying magnetic materials or studying biological samples.  In short, quantum is the next frontier in sensing technology.

As recently as 2019, spin defects known as qubits were discovered in 2D materials (hexagonal boron nitride) which could amplify the field of ultrathin quantum sensing.  These scientists hit a snag in their discovery which has unleashed a scientific race to resolve the issues.  Their sensitivity was limited by their low brightness and the low contrast of their magnetic resonance signal.  As recently as two weeks ago on August 9, 2021, Nature Physics published an article titled “quantum sensors go flat,” where they highlighted the benefits and also outlined current shortfalls of this new and exciting means of sensing via qubits in 2D materials.

A team of researchers at Purdue took on this challenge of overcoming qubit signal shortcomings in their work to develop ultrathin quantum sensors with 2D materials. Their publication in Nano Letters was published today, September 2, 2021, and they have solved some of the critical issues and yielded much better results through experimentation.

The optical setup for quantum sensing
Pictured above is the optical setup for quantum sensing in Li’s lab.  In this experiment, a green laser is applied and focused onto the 2D material with spin qubits.  The gold-coated disc in the lower left is the gold film used that allows this experiment to enhance quantum sensing with qubits which can be seen affixed on the lower right.  The lower middle photo is the vacuum chamber with a cryostat for studying samples at low temperatures and the upper photo demonstrates the optical paths of the lab-built confocal microscope.

 

What did they do differently? Dr. Tongcang Li, Associate Professor of Physics and Astronomy and Electrical and Computer Engineering, explains that gold film helped with this breakthrough.

“In our work, we used a gold film to increase the brightness of spin qubits by up to 17-fold,” Li says. “The gold film supports the surface plasmon that can speed up photon emission so we can collect more photons and hence more signals. In addition, we improved the contrast of their magnetic resonance signal by a factor of 10 by optimizing the design of a microwave waveguide. As a result, we substantially improved the sensitivity of these spin defects for detecting magnetic field, local temperature, and local pressure.”

This research was conducted entirely at Purdue University and was collaborative across multiple departments. All twelve authors on this paper are from Purdue University: Xingyu Gao, Boyang Jiang, Andres E. Llacsahuanga Allcca, Kunhong Shen, Mohammad A. Sadi, Abhishek B. Solanki, Peng Ju, Zhujing Xu, Pramey Upadhyaya, Yong P. Chen, Sunil A. Bhave, and Tongcang Li. The first author, Xingyu Gao, is a graduate student working in Li’s laboratory.

Dr. Tongcang Li holds the gold-film microwave waveguide.
Dr. Tongcang Li holds the gold-film microwave waveguide that allows their experimentation to solve some of the critical issues that have plagued qubit signaling in their work to develop ultrathin quantum sensors with 2D materials. These optimized processes will help beat the current limits in processes like studying magnetic materials or studying biological samples.  The first author of this recently released publication, graduate student Xingyu Gao, is shown above with Dr. Li.

 

“This paper documents results from the collaboration between Prof. Sunil A. Bhave, Prof. Yong P. Chen, Prof. Pramey Upadhyaya, and my research group,” says Li. “The collaborative atmosphere at Purdue is crucial for us to produce these results quickly.”

In this experiment, the group applied a green laser and a microwave onto these spin qubits in a 2D material. The material will then emit photons with different colors (red and near-infrared) under the illumination of a green laser. The rate of photon emission depends on the magnetic field, temperature, and pressure. Therefore, the brightness of these spin qubits will change when the magnetic field, temperature, or pressure changes. Thus, they were able to accurately measure the magnetic field with high sensitivity.

In the future, the group plans to use these spin qubits to study novel materials. They also hope to improve the signal further so that a single spin qubit in a 2D material may be used for quantum sensing with unprecedented sensitivity and resolution.

A spin qubit in a 2D material on a gold film.
A spin qubit in a 2D material on a gold film. When placed on a gold-film microwave stripline, spin defects in hexagonal boron nitride show a record-high contrast of their optically detected magnetic resonance and simultaneous plasmonic enhancement of their photon emission. (Credit: Zhujing Xu and Tongcang Li)

 

Source: Tongcang Li, Associate Professor of Physics and Astronomy and Electrical and Computer Engineering

Writer: Cheryl Pierce

Last Updated: Sep 3, 2021 8:29 AM

Department of Physics and Astronomy, 525 Northwestern Avenue, West Lafayette, IN 47907-2036 • Phone: (765) 494-3000 • Fax: (765) 494-0706

Copyright © 2023 Purdue University | An equal access/equal opportunity university | Copyright Complaints

Trouble with this page? Disability-related accessibility issue? Please contact the College of Science.